Best 8 Power Line Conditioners for Home Theater Reviewed

Affiliate Disclaimer: Some of the links on this site are affiliate links. This means we may earn a commission if you click on the link and make a purchase.

Tom could not believe his good luck. He got an entire apartment of his own for only a few hundred bucks a month.

It was a steal.

Although it was located inside an old building, the rental was too cheap for Tom to give it a second thought.

He soon bought a new home theater entertainment set and invited a group of colleagues to his new place.

Everything went well until he decided to play a movie – to show off his newly purchased home entertainment system.

The lights in his apartment flicker the moment he turned on the audio systems…

The movie started.

It was a great movie but Tom was utterly embarrassed. Both the audio and video quality suck.

Once in a while, audio buzzing noise could be heard and video hum-bars could be seen across his 60 inches OLED TV screen.

*Face-palmed* 🤦‍♂️

Tom checked the DVD and nothing was wrong.

He powered on and off the entertainment system multiple times.

No improvements.

After parting with his colleagues with nothing short of sheer embarrassments, he returned the home theater entertainment set to the shop he bought from the following day.

The shop technician tested the set in front of Tom. Both the audio and visual quality were great playing the same DVD movie.

Tom was confused.

After a short verbal exchange and deductions, they nailed the root cause.

The old building.

The AC outlets and wiring of old buildings usually suffer from frequent power fluctuations and interference.

The shop tech told Tom that a power conditioner should help him out.

He recommended one of the many models of power line conditioners in his shop.

After some bargaining and demonstrations on how it works, Tom bought one and went back home.

Two hours later…

Tom was a happy man.

He played the same movie once again. Both the audio and image quality was superb after the direct power from the AC outlet was filtered and stabilized.

In Tom’s opinion, the few hundred dollars were well spent. 🙂

If you are new to power conditioning products and are hoping to get the best possible model that suits your needs, be sure to check out the comparison table below.

Our team has researched and written a detailed review for each of the power conditioner brands and models – be sure to read them before deciding on the one that suits your environment and requirements.

If you are in a hurry, be sure to check out our recommended model below.

Editorial Top Pick

Furman PL-PRO C 20 Amp Advanced Level Power Conditioner Furman PL-PRO C is our best editorial pick among many other power conditioners based on its superior protection, outstanding performance and features.

Furman is truly the undisputed industry leader when it comes to AC power conditioning and protection. It has been a renowned and trusted brand for audio and visual professionals for more than 40 years.

Many mission-critical events have been hosted using Furman’s best-in-class products and they have proven to deliver clean, stable and protected power consistently regardless of the environment and circumstances.

And most importantly, it is reasonably priced. 🤑

With E.V.S, SMP and LiFT power protection and filtering capabilities all packed in, it is truly a worthy power conditioning device to be had based on its current price point.

Beyond its sleek exterior, I personally like the 20-segment tricolor voltage meter bar which allows you to monitor the incoming AC voltages that are going into your costly AV equipment.

If you are an AV professional constantly on the go, you will come to appreciate the USB charging port that comes with PL-PRO C.

What I truly like about PL-PRO C is that it offers two isolated banks of outlets that allow interference to be isolated between analog and digital AV equipment.

To top it off, PL-PRO C is one of the few Furman power conditioners that offers 5 years of limited warranty.

Peace of mind for 5 years – truly a model worth trying out. 😉

Amazon Price

Buying Guide for Power Conditioners

Buying Guide

Ready to power up your all-new home entertainment systems that you have spent thousands of dollars on?

Not quite.

Contrary to what most people believe, NOT all power lines are ‘clean’. Those raw and non-regulated power sources from your home or office could cause untold damage to your costly AV equipment.

Old buildings in some areas may have dirty power lines that could drastically reduce the quality of your audio and video output with electromagnetic interference and more. Not to mention nasty power spikes that may fry your AV equipment in a split second.

Before you rush online and spent some pretty pennies on what you deem as the best power conditioner, be sure to read the buying guide I have prepared for you below. 📑

Things to Consider Before Getting One

Budget

This may be obvious to some people but often times I do hear clients mentioning to me that they over-spent on their home appliances and ended up having to get installment loans (with interests) for other home essentials. 🙄 Do plan out your budget prior to getting one.

Features and Functions (a.k.a Bells and Whistles)

Thanks to the many creative marketing ads these days, many people (including myself) have often been enticed by the latest features and technology and end up paying for functions and features that we do not really need. 🙁 Unless you have a spare budget to splurge, be sure to get a power line conditioner that best suits your requirements (office AV equipment, home theater or musical gigs etc) so that you will not pay for features that you may NEVER use.

Number of Outlets

This is one area in which you will have to decide depending on the number of connected AV equipment you plan to have now or in the near future.

Rack-mount Capability

Again, this is something you will have to consider before getting your ideal brand and model of the power conditioner.

Environment

If you are already staying inside an old building or area with frequent power disturbances and power grid disruptions, you should get a power line conditioner to safeguard your home theater and AV equipment as soon as you can.

And if you are planning to move into an area with old buildings, I would strongly suggest that you check out the area to make sure there are no serious power line problems waiting to damage your prized AV equipment.

If you can avoid moving into an old building or area with power line issues, you will NOT need to get a power conditioner that comes with a whole lot of features and functions.

Essential Features to Have

Wall Wart Spacing Indicator

This is one important factor you will have to consider while picking the best line conditioners to protect your home theaters and other AV equipment. Some old AV equipment may come with a big-sized plug that will take up twice the space of a single outlet.

Master On/Off Switch

Make sure to pick one with a master switch if you want convenience and a need to trim down your monthly electrical bill. Switch off all equipment when NOT in use will help you save some cash. Do not waste it on phantom loads.

RFI/EMI Noise Filtration

This is probably the bare minimum feature you should have when getting a power conditioner. Once electrical interference is filtered away, you will definitely enjoy the better sound and visual quality of your home theater system.

Warranty

All power line conditioners should come with a warranty and perhaps some sort of connected equipment insurance policy. Be sure to read and understand the warranty terms and conditions before swiping that credit card of yours. 😉

Good to Have Features  and Functions

Below is a list of features and functions that you MAY need depending on your individual situation and requirements. Never get a power line conditioner with features that you may never use.

Ultrasonic Filtration outlets

Cable Satellite and Telco connection ports

SMP (Series Multi-Stage Protection)

LiFT (Linear Filtering Technology)

E.V.S (Extreme Voltage Shutdown)

Front panel Voltmeter and Current meter display

Power Sequencing

Front Panel Retractable LED Lamp

With all the technical jargon and specifications, it can be really daunting when shopping to get the best power conditioner that suits your needs for the first time. But once you have considered your requirements and budget, choosing the best line conditioner for your home theater setup should be a walk in the park.

Most online retailers will always tout that they have the best power conditioners – be sure to always read up some reviews and make decisions based on your needs and not wants.

If you are still feeling confused and helpless after reading this buying guide, try sticking to tried and trusted brands like Panamax or Furman.

Top 8 Editorial Recommendations
Model Name
No. of Outlets
Weight
Dimensions
LiFT/SMP/E.V.S features
Our Reviews
Panamax MR4300 9 Outlet Power Conditioner and Surge Protection

Panamax MR4300 Power Conditioner

9

6.5 pounds

6 x 17 x 2.19 inches

Yes

Read Review
Furman PL-PRO C Power Conditioner

Furman PL-PRO C Power Conditioner

9

15 pounds

10.5 x 19 x 1.8 inches

Yes

Read Review
Tripp Lite 2400W LC2400 Line Conditioner

Tripp Lite LC2400 Power Line Conditioner

6

11.65 pounds

10.2 x 8.8 x 7.8 inches

No

Read Review
Pyle PS900 Audio/Video AC Power Conditioner

Pyle PS900 AC Power Conditioner

9

18.51 pounds

21.75 x 17.75 x 6.75 inches

No

Read Review
Furman Elite-15 DM i 13-Outlet Linear Filtering AC Power Source

Furman Elite-15 DM i Power Conditioner

13

14 pounds

14.75 x 17 x 4 inches

Yes

Read Review
APC H15BLK 12-Outlet H-Type Rack-Mountable Power Conditioner

APC H15BLK Rack-Mountable Power Conditioner

12

16.7 pounds

20.8 x 13.1 x 7.2 inches

No

Read Review
iFi Power Station Active Power Conditioner Mains Bar / Power Strip / Surge Protector

iFi Power Station Active Power Conditioner

8

4.36 pounds

18.82 x 3.78 x 29.92 inches

No

Read Review
Furman Power Conditioner, Black (M-8S)

Furman M-8S Power Conditioner

8

5 pounds

21.75 x 9.25 x 3.5 inches

No

Read Review

1Panamax MR4300 Power Conditioner

===

Panamax MR4300 9-Outlet Home Theater Power Management with Surge Protection and Power Conditioning

It is very hard to take your eyes off Panamax MR4300 once you glaze upon its futuristic exterior that adds a neat, quiet and subtle charm to its overall build and design.

Besides having an attractive design, I ought to mention that Panamax is the industry leader when it comes to having exclusive technologies that provide electrical protection, filtration, and power monitoring.

As mentioned in my full review of MR4300, Automatic Voltage Monitoring (AVM) and Protect or Disconnect™ Technology are the 2 features that make MR4300 stand out.

Power irregularities like under-voltage (brownout) or over-voltage (power spike) will have no chance to get through to your AV components with the patented AVM technology in place. The moment these current fluctuations are detected, the power source will be shut off and will be automatically restored when the safe level of power voltage resumes.

When MR4300 detects extremely strong voltage spikes (lightning) that are beyond its ability to shield, the Protect or Disconnect™ Technology will kick in almost instantaneously and permanently cut off the AC power source to all connected AV equipment. This will ensure your prized AV components remain safe and intact.

If you like me who prefer a digital display of incoming voltages, you will be glad that this power conditioner for home theater comes with a Digital Volt Meter besides having a media light control button and a USB charger at the front panel.

With so many smart features and technology in place, Panamax MR4300 is definitely a good investment when it comes to having great peace of mind (lifetime product warranty) whenever a lightning storm comes around.

Panamax MR4300

Specification Table

Dimensions 6 x 17 x 2.19 inches
Net Weight 6.5 pounds (2.95 kg)
No. Isolated Banks 2
Low Voltage Trigger n.a
Under-Voltage Shutoff 100V ± 2V
Over-Voltage Shutoff 140V ±4V
Filtration Rating Bank 1:-70dB min. @ 100kHz-65dB min. @ 250kHz-45dB min. @ 500kHzMax filtration: -80dB @ 150kHz

Bank 2 – High Current, Low Impedance-50dB min. @ 100kHz-60dB min. @ 250kHz-45dB min. @ 500kHzMax filtration: -63dB @ 250kHz

Rack Mountable Yes
PROS:
  • Automatic Voltage Monitoring (AVM)
  • Protect or Disconnect™ Technology
  • Digital Volt Meter Front Panel Lights
  • Line Fault and Unsafe Voltage Indicator Lights
  • 2 Isolated Banks of High Current and Linear Filtration Outlets
  • USB Charging Slot
  • 8 Foot Long Power Cord
  • 15 Amp Circuit Breaker
  • Lifetime Product Warranty
CONS:
  • Only 1 USB Charging Slot
  • Comes with a Cat5 Ethernet cable
  • Lack of ‘Always On’ outlets

Amazon Price

Back to Comparison Table


2Furman PL-PRO C Power Line Conditioner

===

Furman PL-PRO C 20 Amp Advanced Level Power Conditioner

If you are already impressed with Furman PL-PRO C’s sleek-looking exterior and colorful LED voltmeter, you will be more pleased to know that this 9 outlet Furman power conditioner has more features to offer.

Not only does it come with a Front panel mounted USB charger (a rare feature across most Furman models), it also comes with a dual pull-out lamp. These are long-life, low heat front panel LED lights with a dimmer-power switch for rack illumination.

Furman PL-PRO C, like most of its counterparts, comes with a Master Power Switch and a Convenience Front panel outlet for easy access.

Most importantly, this PL-PRO C comes equipped with two isolated banks of (3 + 5) outlets each to help stem interference from both analog and digital equipment. We love the fact that the three outlets on Bank 1 are widely spaced-out to cater for wall warts.

In terms of power conditioning features, this Furman model, too, offers top-of-the-line features like Series Multi-stage Protection and Extreme Voltage Shutdown in addition to the Linear Filtering Technology.

Furman PL-PRO C  is a Furman Classic Series power conditioner that has been precisely engineered to exceed the critical demands of many A/V professionals.

Whether you are an audio/video professional or just for your home theater setup, PL-PRO C is a worthy model to consider for unequaled audio and video clarity.

Furman PL-PRO C

Specification Table

Dimensions 10.5 x 19 x 1.8 inches
Net Weight 15 pounds (6.8 kg)
No. Isolated Banks 2
Low Voltage Trigger n.a
Under-Voltage Shutoff 90V
Over-Voltage Shutoff 140V
Filtration Rating 10 dB @ 10 kHz
40 dB @ 100 kHz
50 dB @ 500 kHz
Rack Mountable Yes
PROS:
  • 9 outlets (8 rear AC outlets and 1 convenience front panel outlet)
  • 1 Front panel USB Charger
  • 20 amp (2400 watt) capacity
  • 20-segment LED tri-color Voltmeter
  • EVS and Protection OK indicators (Front panel)
  • Master Control Switch (Power saving)
  • Extreme Voltage and Protection Mode LED
  • Series Multi-Stage Protection (SMP+)
  • Advanced Linear Filtering Technology (LiFT)
  • Dual Smooth Track LED dimmable rack lights
  • 3 x wall wart spacing outlets for large transformers
  • 2 isolated banks  (Analog and Digital equipment)
  • Great 5 Years Limited Warranty
CONS:
  • Big footprint

Amazon Price

Back to Comparison Table


3Tripp Lite LC2400 Line Conditioner

===

Tripp Lite LC2400 Line Conditioner 2400W AVR Surge 120V 20A 60Hz 6 Outlet 6-Feet Cord

Tripp Lite LC2400 may not look as aesthetically pleasing as most of its counterparts, yet it does pack a punch (2400W power capacity) when it comes to protecting your home theater and AV equipment against damaging power disturbances.

Weighing around 11.65 pounds,  this 1440 joules rating power line conditioner from Tripp Lite has a compact design that allows easy integration into both your home office and home theater setup.

In addition, this power conditioner for home theater also comes equipped with built-in diagnostic capability. It has seven diagnostic LEDs that provide full status information on AC power, line status as well as incoming voltage level.

AC power (GREEN = Norm)

Incoming voltage level (2 x YELLOW = HIGH/LOW, 2 x RED = Very High/Very Low) and

AC line status (GREEN = Line Ok, RED = Line Fault)]

Just like most good quality power conditioners, this six-outlet Tripp Lite line conditioner, too, comes with AVR (Automatic Voltage Regulation) feature. The built-in AVR feature helps protect your costly AV equipment from the damaging effects of brownouts and over-voltages.

If you are looking to get a decent quality line conditioner from a reputable brand that will not burn a hole in your pocket, LC2400 will be worth considering.

Its 2-year warranty and $25,000 ultimate lifetime insurance offer great peace of mind if you happen to stay near lightning-prone area or in an old building with frequent power disturbances.

Tripp Lite LC2400

Specification Table

Dimensions 10.2 x 8.8 x 7.8 inches
Net Weight 11.65 pounds (5.28 kg)
No. Isolated Banks n.a.
Low Voltage Trigger n.a
Under-Voltage Shutoff n.a.
Over-Voltage Shutoff n.a.
Filtration Rating n.a.
Rack Mountable No
PROS:
  • AVR (Automatic Voltage Regulation)
  • 6 x AC Outlets
  • Built-in 7 x Diagnostic LEDs
  • 2400W power capacity
  • EMI/RFI Line Noise Filtering
  • 1400 Surge Suppression Rating
  • Compact Design
  • 2 Year Warranty + 25,000 ultimate lifetime insurance
CONS:
  • Lack of USB Charging Port
  • Not rack mountable
  • No Isolated Banks

Amazon Price    eBay Price

Back to Comparison Table


4Pyle PS900 AC Power Conditioner for Audio/Video

===

Pyle PS900 Audio/Video AC Power Conditioner, Voltage Filter, Noise/Interference Elimination, Processor Sequencer with 3-Prong Outlet Plugs

Whether you are a music professional or just an avid audio/video enthusiast, Pyle PS900 will work wonders if you have a whole lot of AV equipment that needs high-level precise timing power sequencing.

Besides being able to program the power sequence for all 8 rear outlets, PS900 also offers Sequence Switch LEDs and Power Output Cut switches (at the front panel) that allow manual control of all 8 power channels at the rear panel.

If you are running mission-critical AV gigs or projects, you will definitely appreciate the ability to actively monitor the AC voltage in real-time as well as the wiring and grounding status of each power source at the rear panel.

In my opinion, Pyle PS900 is definitely a cost-effective alternative for people looking for power conditioners that come with loads of useful features to help safeguard their prized AV equipment or home theater at home or at work.

Pyle PS900

Specification Table

Dimensions 21.75 x 17.75 x 6.75 inches
Net Weight 18.51 pounds (8.4 kg)
No. Isolated Banks 0
Output Current Max 10Amp AC
Output Voltage Max 275 Volt AC
MAX. Output Power 2200 Watt
Sequence Switch Time 2 seconds
Rack Mountable Yes
PROS:
  • Great Features – Affordable Price
  • Power Supply Processor Sequencer
  • Supplies Clean Filtered AC Power: 2-Stage High Insert Dissipation
  • Built-in 2 Stage EMI Filter for Each Output (On Rear Panel)
  • Series Link More than 100 Units with Automatic Master Unit Display – Select-able Step Time and Real Time Display
  • Output Cut Switch for All Nine Channels
  • Monitors AC Voltage in Real Time
  • Display Shows Wiring and Ground Status
  • LED Displays: Output Cut, Master, Bypass, Power, AC Voltage and Temperature
  • Step Time Display in 7 Segment LED
  • 1 year warranty
CONS:
  • Lack of USB Charging Ports
  • Manual is not useful for people not familiar with programming of power sequences

Amazon Price    Amazon Price

Back to Comparison Table


5Furman Elite-15 DM i Power Conditioner

===

Furman Elite-15 DM i Power Conditioner

If you are like me who owns a home entertainment powerhouse in the comfort of my home, Furman Elite-15 DM i could be right up your alley.

Equipped with 13 AC outlets and 3 isolated banks, Elite-15 DM i is more than sufficient to handle a huge array of multimedia equipment like those listed below:

  • Powered Sub-woofer
  • Turntable
  • PSP/X-Box Gaming Console
  • Audio Pre-Amplifier
  • Satellite Receiver
  • 2 – 7 Channel Amplifier / Receiver
  • DVD/Blu-Ray Player
  • Plasma/LCD TV
  • High Definition Projector

Not only does Furman Elite-15 DM-i come with a 12-Volt triggering function, but its sleek-looking front panel also offers a laboratory-grade dual voltage and current meters monitoring display.

The voltage meter display monitors incoming AC voltage while the current meter display provides a reading of your system’s total AC current draw (+/-0.1 amp typically).

There is also a rear panel mounted dimmer switch which allows you to dim both the blue voltage and current displays for optimum video viewing experience in the dark. 😉

This power conditioner from Furman comes with all the important protection and filtering features like E.V.S, SMP and LiFT.

Is Furman Elite-15 DM i worth buying? Well, it depends.

Like I mentioned earlier, if you own a whole lot of home entertainment systems at home or in the office, Elite-15 DM i is definitely the right fit for you. If not, Furman PST-8 DIG would be a more cost-efficient choice for you.

Furman Elite-15 DM i

Specification Table

Dimensions 14.75 x 17 x 4 inche
Net Weight 14 pounds (6.35 kg)
No. Isolated Banks 3
Low Voltage Trigger 12V (In/Out)
Under-Voltage Shutoff 85V
Over-Voltage Shutoff 140V
Filtration Rating >40 dB from 10Khz. – 100 kHz.

>80 dB from 100 Khz. – 1GHz.(Linear attenuation curve from 0.05 _ 100 ohms line impedance)

Rack Mountable Yes
PROS:
  • 13 AC outlets
  • 3 isolated banks of AC outlets
  • Extreme Voltage and Protection Mode LED
  • Series Multi-Stage Protection (SMP+)
  • Advanced Linear Filtering Technology (LiFT)
  • Zero ground contamination circuitry
  • 12 Volt triggering capability (with bypass option)
  • Laboratory grade dual voltage and current meters
  • Rack-Mountable
  • Front panel Voltmeter and Current meter display
  • On/Off Control Switch
  • 3 Year Limited Warranty
CONS:
  • Lack of USB Charging Ports
  • No Wall Wart Spacing outlets

Amazon Price

Back to Comparison Table


6APC H15BLK Rack-Mountable Power Conditioner

===

APC H15BLK 12-Outlet H-Type Rack-Mountable Power Conditioner

My first impression of APC H15BLK was not so great. I did not like the old-school design of the front panel. But as I slowly explore the features and capabilities that come with this 5270 surge rating power conditioner, I reminded myself again to never judge a book by its cover. 😜

First off, I was wow-ed by the 4 isolated banks located at the rear panel. Not only does it offers dedicated banks for Digital, Analog and Video equipment, but there is even one for sub-woofers and amplifiers. 👍

If you are living in an area with loads of power disturbance and instabilities, you will definitely appreciate that this APC power conditioner comes with the Automatic Voltage Regulation ability to help correct low and high voltage conditions.

Hoping to get rid of those irritating ‘popping’ sounds from your speakers whenever you power on your AV system? H15BLK comes with the power sequencing feature that allows you to program proper power-up orders for your connected AV equipment. You are also able to configure the right amount of delay between the stages.

If you are on an outdoor gig and have a mobile AV equipment rack, you will be glad to know that APC H15BLK is rack-mountable and it also comes with protection for coaxial video/ cable and RJ11 connections.

With a proven reputation for reliability and expertise in high-quality power protection solutions, investing in an APC product like APC H15BLK should be an easy decision, isn’t it?

APC H15BLK

Specification Table

Dimensions 20.8 x 13.1 x 7.2 inches
Net Weight 16.7 pounds (7.57 kg)
No. Isolated Banks 4
Input frequency 47 – 63 Hz
Surge energy rating 5270 Joules
Peak Current Common Mode 160kAmps
Peak Current Normal Mode 80 per phase kAmps
Rack Mountable Yes
PROS:
  • 12 AC outlets
  • High Surge Rating of 5270 Joules
  • Power Sequencing Capability
  • Phone Line Splitter
  • Building Wiring Fault Indicator
  • Overload Indicator
  • EMI/FRI Noise Filtering
  • Adjustable voltage sensitivity
  • Resettable circuit breakers
  • 4 Isolated power filter banks
  • Automatic Voltage Regulation (AVR)
  • Coaxial 2-way splitter with protection
  • Coaxial video/cable protection
  • RJ11 2-Way Modem/Fax/DSL splitter with protection
  • Five Year Warranty with $750,000 Lifetime Equipment Protection Policy
CONS:
  • Lack of USB Charging Ports
  • Lack of E.V.S, SMP and LiFT capabilities

Amazon Price

Back to Comparison Table


7iFi Power Station Surge Protection Power Conditioner

===

iFi Power Station Active Power Conditioner Mains Bar / Power Strip / Surge Protector - Home Audio Entertainment Upgrade

At first glance, iFi Power Station may look simplistically plain and unworthy of the high dollar it is asking for. Yet, hidden within it beholds technologies that would greatly enhance the quality of your incoming AC power source.

What makes iFi Power Station different from its competitors is that every outlet comes with its own isolated chamber and is constructed with Purcopper for superior conductivity.

Active Noise Cancellation is iFi’s proprietary performance-enhancing technology that came with iFi Power Station. This superior technology helps achieve a far more comprehensive termination of noise across the frequency spectrum – something that could only be matched by very high-end AV equipment.

As most power conditioners offer passive noise reduction via a range of filters and regulators, they do suffer from certain inherent disadvantages. As for iFi Power Station, its Active Noise Cancellation technology uses inverse noise current to cancel out noise in the main signal. This obviously means that you will get to experience and enjoy a much more superior audio and video quality.

Whether you have an expensive home theater entertainment system at home or a mission-critical AV set up at your workplace, iFi Power Station is most effective when it is used with modern audio systems that come with a huge varieties of digital and analog components.

iFi Power Station Active Power Conditioner Mains Bar / Power Strip / Surge Protector - Home Audio Entertainment Upgrade What truly impresses me is that iFi Power Station comes equipped with an AC Purifier which can be inserted back to the main housing when it is not in use. This AC Purifier further enhances the noise-busting capabilities of the Power Station by separating digital and analog components and reducing cross-contamination. Plug any analog AV equipment into the AC purifier and you will have instantly isolated the possibilities of any cross-contamination. How cool is that? 🙂

In case you are wondering, additional AC purifiers can be purchased separately here.

iFi Power Station may seem expensive but if you are someone who truly appreciates high Audio/Video quality in your line of work and requires superior protection from unfiltered power lines, the asking price is obviously justifiable. 😉

HTS 3600 MKII

Specification Table

Dimensions 18.82 x 3.78 x 29.92 inches
Net Weight 4.36 pounds (1.97 kg)
No. Isolated Banks Individual noise isolation chambers – for each outlet
Filtration Rating n.a.
Operating Voltage 90V – 265V
Surge Protection max. 30,000A @ 1,000V/10uS
Noise reduction > 40dB (> 100x)
Rack Mountable Yes
PROS:
  • 8 x Individual noise isolation chambers – for each outlet
  • Active Noise Cancellation2 technology
  • Solid PurCopper™ Bus-Bars for power transfer
  • High performance PurCopper™ outlets
  • Heavy OFHC Continuous Cast Copper internal wiring
  • Polarity and ground diagnostic system
  • Advanced surge and transient protection system
  • Dedicated chassis grounding system
  • One Year Warranty
CONS:
  • Lack of USB Charging Ports
  • No Voltmeter Display
  • Only One Year Warranty

Amazon Price

Back to Comparison Table


8Furman M-8S Power Conditioner

===

Furman M-8S Power Conditioner

Have you ever experienced “Speaker Pop” when you fire up your AV components? Yes?

Well, you are NOT alone.

Most A/V professionals do experience some form of equipment damage while the devices are been powered up or down.

“Speaker Pop” is the loud popping noise that occurs when AV equipment is powered up simultaneously or out of sequence. In the long run, “Speaker Pop” will cause stress damage to the sound system components such as amplifiers and speakers.

Power sequencing is probably the most well-known to help eliminate “Speaker Pop”. If you are looking to get rid of this loud popping noise whenever you power up your A/V equipment, you will want to check out the Furman M-8S power conditioner.

Power sequencing allows your prized AV equipment to be powered up in stages which gives equipment sufficient time to stabilize before the next set of equipment is powered up.

When powering down, the sequence order is reversed which will provide a “soft landing” for your expensive AV equipment.

Besides having Power Sequencing capability, Furman M-8S also features a Merit Line to Neutral surge protection as well as RFI/EMI filtration.

The Merit filter helps to dissipate voltage transients and protect your equipment from damaging power spikes.

Furman M-8S Power Sequence Delay Indicator Light

Front Panel Power Sequence Delay Indicator Light

I personally love the fact that the front panel has Power Sequence Delay indicator lights (see image above) to help you visualize the delay sequence (see image below) when you plug your AV equipment into their 6 respective delay outlets ( 2 in each delay group) at the rear panel.

Power Sequencing Delay Outlets

Furman M-8S Power Sequencing Delay Outlets at Rear Panel

There are also 2 “UnSwitched” outlets at the rear panel and 1 at the front panel for devices that do not need power sequencing.

This 9 outlet power conditioner also comes with a Sequencing On/Off switch at the front panel to help you power On or Off the “Delay 1, 2 and 3 Outlets” at the rear panel.

In case you are wondering, the power sequencing delay interval can be adjusted.

It is factory preset to approximately 5 seconds and it is possible to length or shorten the delay interval.

All in all, Furman M-8S is definitely worth the investment if you own professional or commercial audio systems that require power sequencing capabilities.

Furman M-8S

Specification Table

Dimensions 21.75 x 9.25 x 3.5 inches
Net Weight 5 pounds (2.27 kg)
No. Isolated Banks n.a.
Peak Impluse Current 12000 Amps
Maximum Clamp Voltage 500 Volts Peak
Maximum Continuous Operating Voltage 130V RMS
Filtration Rating >26dB, 100 Khz to 1 MHz
Rack Mountable Yes
PROS:
  • 9 Outlets ( 6 Sequenced Outlets; separated into 3 Delay Groups)
  • Delay 1, 2 and 3 Indicators (Front Panel)
  • Merit Class Surge Protection
  • Power Sequencing Capability
  • Power Sequence On/Off Switch
  • Protection OK indicator
  • Rear Panel Dip Switch ( to help set power sequence mode)
  • Thermal Circuit Breaker (15 Amp)
  • Rack-mountable
  • 3 Years Limited Warranty
CONS:
  • Lack of USB Charging Ports
  • No Wall Wart Spacing outlets
  • Lack of E.V.S, SMP and LiFT capabilities

Amazon Price

Back to Comparison Table

 

Marc Edwards
Marc Edwards

Marc Edwards is the co-founder of GagtheSurge and is actively involved in writing review and information articles for the site. He loves traveling and has been to most of the countries across the four major continents. Besides working and traveling, he also enjoys jungle explorations and deep sea diving.

We will be happy to hear your thoughts

Leave a reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Gag The Surge
Logo